Convey with
Convenience

Our expertly formulated products make sure the limestone is hauled from the mines to the finish mills efficiently.

Cement

Petron offers a variety of high performance lubricants and services to cement operations worldwide. Our top selling Gear Shield®, is a proven open gear lubricant trusted to lubricate hundreds of gear sets on mills and kilns throughout the cement industry. Gear Shield® provides industry leading lambda film thickness and is approved by all major gear manufacturers.

Open Gear Lubrication Mills / Kilns

Gear Shield®
NC

High viscosity residual open gear lubricant for mills and kilns applied via intermittent spray for use in ambient temperatures of 0°C (32°F) and above.

Gear Shield®
NCW

High viscosity residual open gear lubricant for mills and kilns applied via intermittent spray below 0°C (32°F).

Gear Shield®
Synthetic

Transparent synthetic high viscosity open gear lubricant for mills designed to be sprayed through all automatic lubrication equipment.

Gear Shield®
P

Synthetic high viscosity open gear lubricant for mills and kilns applied via intermittent spray with exceptional performance at elevated temperatures above 93°C (200°F).

Kiln Lube
300

Synthetic high viscosity open gear lubricant for mills and kilns, for use in sump applications in warm weather.

Gear Shield®
NC Aerosol

High viscosity residual open gear lubricant for mills and kilns packaged in aerosol spray can.

Gear Cases

Petro Lube 700
Series Oils

High performance Synthetic PAO gear oil.

Petro Lube 400
Series Oil

High performance EP mineral gear oil.

Easy Bar Rotary Kiln Lubricant

Easy Bar Rotary Kiln
Lubricant KTL 100

Synthetic high temperature solid film lubricant for kiln tires and trunnion rollers.

Tire
Glide

Sprayable water and graphite lubricant for kiln tires and trunnion rollers.

Quarry Loaders and Trucks (Pin and Bushing Lubrication)

Petrotac
EP Compound 30

High viscosity synthetic open gear lubricant for shovels and draglines, for use in ambient temperatures ranging from 0°C (32°F) and above.

Petrotac
EP Compound 20

High viscosity synthetic open gear lubricant for shovels and draglines, for use in ambient temperatures ranging from -29°C (-20°F) to 10°C (50°F).

Petro-Plate
M5/800

EP grease containing 5% molybdenum disulfide and exhibiting 800 weld load. Meets major mining equipment OEM specification.

Running In and Gear Cleaning

Gear Run In
391

Open gear lubricating oil blended with chemical additives designed to remove asperities on open gear tooth surfaces.

Petro Kleen
140

Cleaning and softening agent for open gear lubricants designed to soften and clean contaminant build up in gear tooth roots.

Bearings

Petro Plate HD
Series

Premium Calcium sulfonate EP grease with excellent high temperature performance, superb adhesion, structural stability and resistance to water contamination.